#embedded-hal-driver #dac #embedded-hal #driver #async

nct3933

Platform agnostic rust driver for Nuvoton 3-Channel Sink/Source Current DAC NCT3933U

3 unstable releases

0.2.0 Jun 25, 2024
0.1.2 Jun 25, 2024
0.1.1 Jun 24, 2024
0.1.0 Jun 18, 2024

#776 in Hardware support

43 downloads per month

MIT/Apache

23KB
254 lines

crates.io

Rust driver for 3-Channel Sink/Source Current DAC NCT3933U

This is a platform-independent Rust driver for NCT3933, provided in both synchronous and asynchronous versions, based on the embedded-hal and embedded-hal-async features, respectively.

The Device

The NCT3933U includes three adjustable current DACs that are each capable of sinking and sourcing current through SMBusTM interface. Each output has 128 sinking and sourcing settings that are programmed by the SMBusTM interface. The output current also can be programmable for twofold sinking/sourcing increase respectively. The NCT3933U features step speed controlled function which can easily interfacing with general DC/DC converter for voltage adjustment. The NCT3933U also provides power saving function to reduce 60% power consumption when system enters standby mode.

NCT3933U

Usage

The following are ways to use the library

Synchronous version

using STM32G031G8Ux add the following to your Cargo.toml nct3933 = {version = "0.2.0" , features = ["sync"]}

#![no_std]
#![no_main]

#![allow(dead_code)]
#![allow(unused_imports)]

use nct3933::NCT3933Sync as NCT3933;
use nct3933::errors::NCT3933Error;
use defmt:: info;
use embassy_stm32::i2c::Config;
use embassy_time::Timer;
use {defmt_rtt as _, panic_probe as _};
use embassy_stm32::i2c::{self, I2c};
use embassy_stm32::{bind_interrupts, peripherals};
use embassy_stm32::time::Hertz;

bind_interrupts!(struct Irqs {
    I2C1 => i2c::EventInterruptHandler<peripherals::I2C1>, i2c::ErrorInterruptHandler<peripherals::I2C1>;
});

#[embassy_executor::main]
async fn main(_spawner: embassy_executor::Spawner) {
    let p = embassy_stm32::init(Default::default());

    let i2c = I2c::new(
        p.I2C1,
        p.PB6,
        p.PB7,
        Irqs,
        p.DMA1_CH1,
        p.DMA1_CH2,
        Hertz(100_000),
        Default::default(),
    );

    let mut nct3933 = NCT3933::new(i2c, 0x2A).unwrap();

    
    match nct3933.check_id() {
        Ok(()) => { info!("NCT3933 found"); },
        Err(e) => { info!("NCT3933 not found :{:?}",e); },
    }
    match nct3933.set_wdt_state(1,0) {
        Ok(()) => { info!("WDT state set");},
        Err(e) => { panic!("WDT state not set :{:?}",e);},
    }

    match nct3933.set_current(1,10) {
        Ok(()) => { info!("Current set");},
        Err(e) => { panic!("Current not set :{:?}",e);},
    }

    loop { 
        Timer::after_millis(2000).await;
    }
}

Asynchronous version

using STM32G031G8Ux add the following to your Cargo.toml nct3933 = {version = "0.2.0" , features = ["async"]}

#![no_std]
#![no_main]

#![allow(dead_code)]
#![allow(unused_imports)]

use nct3933::NCT3933Async as NCT3933;
use nct3933::errors::NCT3933Error;
use defmt:: info;
use embassy_stm32::i2c::Config;
use embassy_time::Timer;
use {defmt_rtt as _, panic_probe as _};
use embassy_stm32::i2c::{self, I2c};
use embassy_stm32::{bind_interrupts, peripherals};
use embassy_stm32::time::Hertz;

bind_interrupts!(struct Irqs {
    I2C1 => i2c::EventInterruptHandler<peripherals::I2C1>, i2c::ErrorInterruptHandler<peripherals::I2C1>;
});

#[embassy_executor::main]
async fn main(_spawner: embassy_executor::Spawner) {
    let p = embassy_stm32::init(Default::default());

    let i2c = I2c::new(
        p.I2C1,
        p.PB6,
        p.PB7,
        Irqs,
        p.DMA1_CH1,
        p.DMA1_CH2,
        Hertz(100_000),
        Default::default(),
    );

    let mut nct3933 = NCT3933::new(i2c, 0x2A).unwrap();

    
    match nct3933.check_id().await {
        Ok(()) => { info!("NCT3933 found"); },
        Err(e) => { info!("NCT3933 not found :{:?}",e); },
    }
    match nct3933.set_wdt_state(1,0).await {
        Ok(()) => { info!("WDT state set");},
        Err(e) => { panic!("WDT state not set :{:?}",e);},
    }

    match nct3933.set_current(1,10).await {
        Ok(()) => { info!("Current set");},
        Err(e) => { panic!("Current not set :{:?}",e);},
    }

    loop { 
        Timer::after_millis(2000).await;
    }
}
 

License

Licensed under either of

Dependencies

~0.5–1MB
~21K SLoC