9 releases (breaking)
0.10.0  Mar 6, 2023 

0.9.0  Nov 10, 2022 
0.8.2  Oct 7, 2022 
0.8.0  Aug 16, 2022 
0.1.0  May 19, 2021 
#33 in Programming languages
3,068 downloads per month
Used in 4 crates
150KB
2.5K
SLoC
jaq
jaq is a clone of the JSON data processing tool jq. jaq aims to support a large subset of jq's syntax and operations.
jaq focusses on three goals:

Correctness: jaq aims to provide a more correct and predictable implementation of jq, while preserving compatibility with jq in most cases.
Examples of surprising jq behaviour
nan > nan
is false, whilenan < nan
is true.[[]]  implode
crashes jq, and this was not fixed at the time of writing despite being known since five years. The jq manual claims that
limit(n; exp)
"extracts up ton
outputs fromexp
". This holds for values ofn > 1
, e.g.jq n '[limit(2; 1, 2, 3)]'
yields[1, 2]
, but whenn == 0
,jq n '[limit(0; 1, 2, 3)]'
yields[1]
instead of[]
. And perhaps even worse, whenn < 0
, thenlimit
yields all outputs fromexp
, which is not documented.

Performance: I created jaq originally because I was bothered by jq's long startup time, which amounts to about 50ms on my machine. This can particularly show when processing a large number of small files. jaq starts up about 30 times faster than jq and outperforms jq also on many other benchmarks.

Simplicity: jaq aims to have a simple and small implementation, in order to reduce the potential for bugs and to facilitate contributions.
I drew inspiration from another Rust program, namely jql. However, unlike jql, jaq aims to closely imitate jq's syntax and semantics. This should allow users proficient in jq to easily use jaq.
Installation
From Source
To compile jaq, you need a Rust toolchain. See https://rustup.rs/ for instructions. (Note that Rust compilers shipped with Linux distributions may be too outdated to compile jaq.)
The following command installs jaq:
$ cargo install locked jaq
$ cargo install locked git https://github.com/01mf02/jaq # latest development version
On my system, both commands place the executable at ~/.cargo/bin/jaq
.
jaq should work on any system supported by Rust.
If it does not, please file an issue.
Binaries
You may also install jaq using homebrew on macOS or Linux:
$ brew install jaq
$ brew install HEAD jaq # latest development version
Examples
The following examples should give an impression of what jaq can currently do. You should obtain the same outputs by replacing jaq with jq. If not, your filing an issue would be appreciated. :) The syntax is documented in the jq manual.
Access a field:
$ echo '{"a": 1, "b": 2}'  jaq '.a'
1
Add values:
$ echo '{"a": 1, "b": 2}'  jaq 'add'
3
Construct an array from an object in two ways and show that they are equal:
$ echo '{"a": 1, "b": 2}'  jaq '[.a, .b] == [.[]]'
true
Apply a filter to all elements of an array and filter the results:
$ echo '[0, 1, 2, 3]'  jaq 'map(.*2)  [.[]  select(. < 5)]'
[0, 2, 4]
Read (slurp) input values into an array and get the average of its elements:
$ echo '1 2 3 4'  jaq s 'add / length'
2.5
Repeatedly apply a filter to itself and output the intermediate results:
$ echo '0'  jaq '[recurse(.+1; . < 3)]'
[0, 1, 2]
Lazily fold over inputs and output intermediate results:
$ seq 1000  jaq n 'foreach inputs as $x (0; . + $x)'
0 1 3 6 10 15 [...]
Performance
The following evaluation consists of several benchmarks that
allow comparing the performance of jaq, jq, and gojq.
The empty
benchmark runs n
times the filter empty
with null input,
serving to measure the startup time.
The bffib
benchmark runs a Brainfuck interpreter written in jq,
interpreting a Brainfuck script that produces n
Fibonacci numbers.
The other benchmarks evaluate various filters with n
as input;
see bench.sh
for details.
jqcff5336 was compiled manually with disabled assertion checking,
by adding DNDEBUG
to DEFS
in Makefile
.
I generated the benchmark data with bench.sh target/release/jaq jqcff5336 gojq jq
,
followed by pandoc t gfm
.
Table: Evaluation results in seconds ("N/A" if more than 10 seconds).
Benchmark  n  jaq0.9.0  jqcff5336  gojq0.12.9  jq1.6 

empty  512  0.83  1.25  0.96  N/A 
bffib  13  0.92  1.30  2.52  3.16 
reverse  1048576  0.08  1.09  1.16  1.54 
sort  1048576  0.20  1.53  1.77  1.81 
add  1048576  0.96  1.06  2.51  1.69 
kv  131072  0.33  0.25  0.49  0.49 
kvupdate  131072  0.38  0.67  N/A  N/A 
kventries  131072  1.23  1.29  2.23  2.50 
eximplode  1048576  1.32  1.59  1.73  2.77 
reduce  1048576  1.60  1.34  N/A  1.92 
treeflatten  17  0.71  0.54  0.03  1.95 
treeupdate  17  0.47  1.43  4.58  2.73 
tofromjson  65536  0.09  1.59  0.16  1.69 
The results show that jaq is
faster than jqcff5336 on ten out of thirteen benchmarks and
faster than jq 1.6 on all benchmarks.
gojq is faster than jaq only on one benchmark, namely "treeflatten"
(due to implementing the filter flatten
natively instead of by definition).
Features
Here is an overview that summarises:
 features already implemented, and
 features not yet implemented.
Contributions to extend jaq are highly welcome.
Basics
 Identity (
.
)  Recursion (
..
)  Basic data types (null, boolean, number, string, array, object)
 ifthenelse (
if .a < .b then .a else .b end
)  Folding (
reduce .[] as $x (0; . + $x)
,foreach .[] as $x (0; . + $x; . + .)
)  Error handling (
try ... catch ...
)  String interpolation
 Format strings (
@csv
,@html
,@json
)
Paths
 Indexing of arrays/objects (
.[0]
,.a
,.["a"]
)  Iterating over arrays/objects (
.[]
)  Optional indexing/iteration (
.a?
,.[]?
)  Array slices (
.[3:7]
,.[0:1]
)  String slices
Operators
 Composition (

)  Binding (
. as $x  $x
)  Concatenation (
,
)  Plain assignment (
=
)  Update assignment (
=
,+=
,=
)  Alternation (
//
)  Logic (
or
,and
)  Equality and comparison (
.a == .b
,.a < .b
)  Arithmetic (
+
,
,*
,/
,%
)  Negation (

)  Error suppression (
?
)
Definitions
 Basic definitions (
def map(f): [.[]  f];
)  Recursive definitions (
def r: r; r
)
Core filters
 Empty (
empty
)  Errors (
error
)  Input (
inputs
)  Length (
length
)  Rounding (
floor
,round
,ceil
)  String <> JSON (
fromjson
,tojson
)  String <> integers (
explode
,implode
)  String normalisation (
ascii_downcase
,ascii_upcase
)  String splitting (
split("foo")
)  Array filters (
reverse
,sort
,sort_by(.)
)  Stream consumers (
first
,last
,range
,fold
)  Stream generators (
range
,recurse
)  More numeric filters (
sqrt
,sin
,log
,pow
, ...)  More string filters (
startswith
,ltrimstr
, ...)  More array filters (
group_by
,min_by
,max_by
, ...)
Standard filters
These filters are defined via more basic filters.
Their definitions are at std.jq
.
 Undefined (
null
)  Booleans (
true
,false
,not
)  Special numbers (
nan
,infinite
,isnan
,isinfinite
,isfinite
,isnormal
)  Type (
type
)  Filtering (
select(. >= 0)
)  Selection (
values
,nulls
,booleans
,numbers
,strings
,arrays
,objects
,iterables
,scalars
)  Conversion (
tostring
,tonumber
)  Iterable filters (
map(.+1)
,map_values(.+1)
,add
,join("a")
,min
,max
)  Array filters (
transpose
,first
,last
,nth(10)
,flatten
)  Objectarray conversion (
to_entries
,from_entries
,with_entries
)  Universal/existential (
all
,any
)  I/O (
input
)  Regular expressions (
test
,scan
,match
,capture
,splits
,sub
,gsub
)
Advanced features
jaq currently does not aim to support several features of jq, such as:
 Paths
 Modules
 Dates
 SQLstyle operators
 Streaming
Differences between jq and jaq
Numbers
jq uses 64bit floatingpoint numbers (floats) for any number. By contrast, jaq interprets numbers such as 0 or 42 as machinesized integers and numbers such as 0.0 or 3e8 as 64bit floats. Many operations in jaq, such as array indexing, check whether the passed numbers are indeed integer. The motivation behind this is to avoid rounding errors that may silently lead to wrong results. For example:
$ jq n '[0, 1, 2]  .[1.0000000000000001]'
1
$ jaq n '[0, 1, 2]  .[1.0000000000000001]'
Error: cannot use 1.0 as integer
$ jaq n '[0, 1, 2]  .[1]'
1
The rules of jaq are:
 The sum, difference, product, and remainder of two integers is integer.
 Any other operation between two numbers yields a float.
Examples:
$ jaq n '1 + 2'
3
$ jaq n '10 / 2'
5.0
$ jaq n '1.0 + 2'
3.0
You can convert an integer to a floatingpoint number e.g.
by adding 0.0, by multiplying with 1.0, or by dividing with 1.
You can convert a floatingpoint number to an integer by
round
, floor
, or ceil
:
$ jaq n '1.2  [floor, round, ceil]'
[1, 1, 2]
NaN and infinity
In jq, division by 0 has some surprising properties; for example,
0 / 0
yields nan
, whereas
0 as $n  $n / 0
yields an error.
In jaq, n / 0
yields nan
if n == 0
, infinite
if n > 0
, and infinite
if n < 0
.
jaq's behaviour is closer to the IEEE standard for floatingpoint arithmetic (IEEE 754).
jaq implements a total ordering on floatingpoint numbers to allow sorting values.
Therefore, it unfortunately has to enforce that nan == nan
.
(jq gets around this by enforcing nan < nan
, which breaks basic laws about total orders.)
Like jq, jaq prints nan
and infinite
as null
in JSON,
because JSON does not support encoding these values as numbers.
Preservation of fractional numbers
jaq preserves fractional numbers coming from JSON data perfectly (as long as they are not used in some arithmetic operation), whereas jq may silently convert to 64bit floatingpoint numbers:
$ echo '1e500'  jq '.'
1.7976931348623157e+308
$ echo '1e500'  jaq '.'
1e500
Therefore, unlike jq 1.6, jaq satisfies the following paragraph in the jq manual:
An important point about the identity filter is that it guarantees to preserve the literal decimal representation of values. This is particularly important when dealing with numbers which can't be losslessly converted to an IEEE754 double precision representation.
Please note that newer development versions of jq (e.g. commit cff5336) seem to preserve the literal decimal representation, even if it is not stated in the manual.
Assignments
Like jq, jaq allows for assignments of the form p = f
.
However, jaq interprets these assignments differently.
Fortunately, in most cases, the result is the same.
In jq, an assignment p = f
first constructs paths to all values that match p
.
Only then, it applies the filter f
to these values.
In jaq, an assignment p = f
applies f
immediately to any value matching p
.
Unlike in jq, assignment does not explicitly construct paths.
jaq's implementation of assignment likely yields higher performance,
because it does not construct paths.
Furthermore, this also prevents several bugs in jq "by design".
For example, given the filter [0, 1, 2, 3]  .[] = empty
,
jq yields [1, 3]
, whereas
jaq yields []
.
What happens here?
jq first constructs the paths corresponding to .[]
, which are .0, .1, .2, .3
.
Then, it removes the element at each of these paths.
However, each of these removals changes the value that the remaining paths refer to.
That is, after removing .0
(value 0), .1
does not refer to value 1, but value 2!
That is also why value 1 (and in consequence also value 3) is not removed.
There is more weirdness ahead in jq;
for example, 0  0 = .+1
yields 1
in jq,
although 0
is not a valid path expression.
However, 1  0 = .+1
yields an error.
In jaq, any such assignment yields an error.
jaq attempts to use multiple outputs of the righthand side, whereas
jq uses only the first.
For example, 0  (., .) = (., .+1)
yields 0 1 1 2
in jaq,
whereas it yields only 0
in jq.
However, {a: 1}  .a = (2, 3)
yields {"a": 2}
in both jaq and jq,
because an object can only associate a single value with any given key,
so we cannot use multiple outputs in a meaningful way here.
Because jaq does not construct paths,
it does not allow some filters on the lefthand side of assignments,
for example first
, last
, limit
:
For example, [1, 2, 3]  first(.[]) = .1
yields [0, 2, 3]
in jq, but is invalid in jaq.
Similarly, [1, 2, 3]  limit(2; .[]) = .1
yields [0, 1, 3]
in jq, but is invalid in jaq.
(Inconsequentially, jq also does not allow for last
.)
Definitions
Like jq, jaq allows for the definition of filters, such as:
def map(f): [.[]  f];
However, unlike in jq, such filters in jaq cannot refer to themselves.
Furthermore, jaq does not support nested filters.
That is, a filter such as recurse
cannot be defined in jaq:
def recurse(f): def r: ., (f  r); r;
Note that while recurse
cannot be defined manually in jaq,
jaq provides recurse
as core filter.
Folding
jq and jaq provide filters
reduce xs as $x (init; f)
and
foreach xs as $x (init; f)
.
In jaq, the output of these filters is defined very simply:
Assuming that xs
evaluates to x0
, x1
, ..., xn
,
reduce xs as $x (init; f)
evaluates to
init
 x0 as $x  f
 ...
 xn as $x  f
and foreach xs as $x (init; f)
evaluates to
init
 x0 as $x  f  (.,
 ...
 xn as $x  f  (.,
empty)...)
Additionally, jaq provides the filter for xs as $x (init; f)
that evaluates to
init
 ., (x0 as $x  f
 ...
 ., (xn as $x  f
)...)
The difference between foreach
and for
is that
for
yields the output of init
, whereas foreach
omits it.
For example,
foreach (1, 2, 3) as $x (0; .+$x)
yields 1, 3, 6
, whereas
for (1, 2, 3) as $x (0; .+$x)
yields 0, 1, 3, 6
.
The interpretation of reduce
/foreach
in jaq has the following advantages over jq:
 It deals very naturally with filters that yield multiple outputs.
In contrast, jq discriminates outputs of
f
, because it recurses only on the last of them, although it outputs all of them.Example
`foreach (5, 10) as $x (1; .+$x, .)` yields `6, 1, 9, 1` in jq, whereas it yields `6, 16, 6, 1, 9, 1` in jaq. We can see that both jq and jaq yield the values `6` and `1` resulting from the first iteration (where `$x` is 5), namely `1  5 as $x  (.+$x, .)`. However, jq performs the second iteration (where `$x` is 10) *only on the last value* returned from the first iteration, namely `1`, yielding the values `9` and `1` resulting from `1  10 as $x  (.+$x, .)`. jaq yields these values too, but it also performs the second iteration on all other values returned from the first iteration, namely `6`, yielding the values `16` and `6` that result from ` 6  10 as $x  (.+$x, .)`.  It makes the implementation of
reduce
andforeach
special cases of the same code, reducing the potential for bugs.
Compared to foreach ...
, the filter for ...
(where ...
refers to xs as $x (init; f)
)
has a stronger relationship with reduce
.
In particular,
the values yielded by reduce ...
are a subset of
the values yielded by for ...
.
This does not hold if you replace for
by foreach
.
Furthermore, jq provides the filter
foreach xs as $x (init; f; proj)
(foreach/3
) and interprets
foreach xs as $x (init; f)
(foreach/2
) as
foreach xs as $x (init; f; .)
, whereas
jaq does not provide foreach/3
because
it requires completely separate logic from foreach/2
and reduce
in both the parser and the interpreter.
Miscellaneous
 Slurping: When files are slurped in (via the
s
/slurp
option), jq combines the inputs of all files into one single array, whereas jaq yields an array for every file. The behaviour of jq can be approximated in jaq; for example, to achieve the output ofjq s . a b
, you may usejaq s . <(cat a b)
.  Cartesian products:
In jq,
[(1,2) * (3,4)]
yields[3, 6, 4, 8]
, whereas[{a: (1,2), b: (3,4)}  .a * .b]
yields[3, 4, 6, 8]
. jaq yields[3, 4, 6, 8]
in both cases.  List updating:
In jq,
[0, 1]  .[3] = 3
yields[0, 1, null, 3]
; that is, jq fills up the list withnull
s if we update beyond its size. In contrast, jaq fails with an outofbounds error in such a case.  Input reading:
When there is no more input value left,
in jq,
input
yields an error, whereas in jaq, it yields no output value.  Joining:
When given an array
[x0, x1, ..., xn]
, in jq,join(x)
converts all elements of the input array to strings and intersperses them withx
, whereas in jaq,join(x)
simply calculatesx0 + x + x1 + x + ... + xn
. When all elements of the input array andx
are strings, jq and jaq yield the same output.  Ranges:
The filter
range(m; n)
constructs a sequence of numbersm, m+1, ...
, where any number must be smaller thann
. In jq,m
andn
can be floatingpoint numbers, whereas in jaq,m
andn
must be integers. This is to avoid potential numerical stability problems. That means that unlike in jq, you cannot userange(m; infinite)
to generate the infinite sequencem, m+1, ...
. However, you can usem  recurse(.+1)
to achieve the same in jaq.
Contributing
Contributions to jaq are welcome. In particular, implementing various filters of jq in jaq is a relatively lowhanging fruit.
To add a new core filter (such as group_by
), it suffices to:
 Implement the filter in the
filter
module.  Add a test with the filter name to
tests.rs
, and check whether jq yields the same results.  Add derived filters to the standard library.
Voilà!
Please make sure that after your change, cargo test
runs successfully.
Acknowledgements
jaq has profited tremendously from:
 serde_json to read and colored_json to output JSON,
 chumsky to parse and ariadne to prettyprint parse errors,
 mimalloc to boost the performance of memory allocation, and
 the Rust standard library, in particular its awesome Iterator, which builds the rocksolid base of jaq's filter execution
Dependencies
~3–4.5MB
~107K SLoC